LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1998 >> SW2 Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Lubrication >> Checking Fluid Level >> All Others
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Others

  1. Start engine. Operate vehicle for at least 15 minutes or until operating temperature is reached. With engine at curb idle and vehicle on level ground, move gear selector lever through all ranges, ending in Park.
  2. Remove transmission dipstick, wipe clean and fully reinsert into filler tube. Remove dipstick again, and inspect fluid level. Fluid level should be between ADD 1 PT. or .5L mark and FULL HOT mark on dipstick.
CAUTION: If vehicle has been driven for an extended period of time at high speeds, in city traffic, in hot weather or if vehicle has been pulling a trailer, an accurate fluid level reading cannot be made until vehicle has been parked and ATF is allowed to cool about 30 minutes.
scientia non olet · About LEMON Manuals