Section 17 (Body Control Modules): Operation: Notes

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

The Body Control Module (BCM) has 2 main power feeds (high and low current) and 2 main grounds. Low power feed (battery 1) is used to supply power for BCM's logic and internal driver operation. Operating current at low power feed should not exceed 3 amps. High power feed is used to supply power for systems that draw higher amounts of current. Operating current at high power feed should not exceed 7.5 amps for 2 seconds when BCM is awake or 2.5 milliamps when BCM is asleep. For most functions, BCM system voltage should be 9-16 volts. If voltage exceeds 16 volts, BCM will disable functions that could be damaged.

If a BCM malfunction would result in unacceptable vehicle operation, BCM will take fail-soft action to minimize the condition (i.e., BCM will substitute a fixed input or output value if BCM is unable to interpret data).