Content Theft Deterrent Programming
NOTE:
Other options may be programmed using scan tool. See scan tool users guide for information.
There are 3 modes for content theft deterrent activation/deactivation. They are as follows:
- Active
Content theft will only be armed by using transmitter to lock doors. - Passive
Content theft system will arm 5 minutes after ignition is off, all doors and trunk are closed. Any door opened will reset 5 minute timer. - Disabled
Content theft system will not activate.
To enter programming mode, press PANIC button on transmitter 8-10 times in 5 seconds with ignition on. Within 3 seconds select mode by pressing appropriate button on transmitter. See MODE SELECTION table. BCM will chime once when programming is complete.
MODE SELECTION
| Transmitter Button | Mode |
|---|---|
| LOCK | Active |
| TRUNK | Passive |
| UNLOCK | Disabled |