Programmable Module Installation Procedure
WARNING: This page does not describe the selected car, but rather 120 other vehicles, including the 2002 Saturn Vue, 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, and 2002 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
NGS tester will only store module configuration information for 24 hours.
Prior to removal of applicable programmable module, perform Programmable Module Installation (PMI) procedure by uploading module configuration information to New Generation Star (NGS) tester using manufacturer's instructions. Once new programmable module has been installed in vehicle, download module configuration information from NGS tester into new module. On some models, module configuration information is also retained in Powertrain Control Module (PCM). If module information cannot be accessed from module, use NGS tester with Ford Service Function (FSF) card and flash cable to upload module configuration information from PCM following scan tool instructions.