LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> LS2 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Testing & Engine Component Testing >> Miscellaneous Controls >> Transmission >> Torque Converter Lock-Up Signal At Transmission
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Converter Lock-Up Signal At Transmission

  1. Warm engine to operating temperature. Raise vehicle and support drive wheels. Support suspension where necessary to prevent damage to drive axles.
  2. Disconnect torque converter clutch harness connector at transmission. Connect a test light between appropriate torque converter clutch harness connector terminals. Start engine and place transmission in Drive. Accelerate vehicle to 45 MPH and note test light.
  3. If test light does not illuminate, check for open or short to ground in solenoid power supply circuit of torque converter clutch harness connector. Also, check for open in ground circuit between torque converter clutch harness connector and PCM. If circuit is okay, see TORQUE CONVERTER LOCK-UP SIGNAL FROM PCM .
scientia non olet · About LEMON Manuals