Test A: Traction Control Diagnostic Check
- Install scan tool. Turn ignition on, with engine off. Check DTCs. If DTCs are present, diagnose affected DTC(s). If no DTCs are present, go to next step.
- Turn ignition off. Disconnect scan tool. Start engine. Observe LED on traction control switch. If LED turns on after 1-3 seconds, go to next step. If LED does not turn on, go to TEST B: TRACTION CONTROL SWITCH INDICATOR LED DOES NOT TURN ON .
- Toggle traction control switch. If LED turn off, go to next step. If LED does not turn off, go to TEST C: TRACTION CONTROL SWITCH INDICATOR LED DOES NOT TURN OFF .
- Turn ignition off for 10 seconds. Restart engine. Observe LOW TRACTION indicator light. If indicator light illuminates after 1-3 seconds, system is operating properly. If indicator light does not illuminate after 1-3 seconds, check indicator light circuit. See WIRING DIAGRAMS .