Removal & Installation: Starter: Installation
WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Before installing starter onto engine, tighten inner solenoid terminal nuts to ensure they are secure in cap. Starter failure may occur due to terminal or cap damage. Install positive battery cable and wiring to solenoid terminals. Tighten solenoid wiring retaining nuts to specification. Ensure shims are installed in original location (if equipped). Tighten starter mounting bolts. See TORQUE SPECIFICATIONS . Install intermediate exhaust pipe using NEW gaskets. To complete installation, reverse removal procedure. Reprogram Remote Keyless Entry (RKE) transmitters. See SYSTEM PROGRAMMING in REMOTE KEYLESS ENTRY SYSTEMS - CORVETTE article in ACCESSORIES & EQUIPMENT.