LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Park/Neutral Position Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Park/Neutral Position Switch: Installation

  1. Install switch-to-transaxle and install switch-to-case bolts. Do not tighten bolts at this time. Install control lever-to-manual shift shaft. Prevent manual shift shaft from rotating by holding control lever while installing retaining nut. Tighten transaxle control lever-to-manual detent shaft nut to specification. See TORQUE SPECIFICATIONS  .
  2. Install cable to control lever and adjust shift cable. See SHIFT CABLE  under ADJUSTMENTS. Before tightening transaxle range switch-to-case bolts, adjust transaxle range switch. See PARK/NEUTRAL POSITION SWITCH  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals