LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SC2 Automatic, MP6 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Park Lock Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Park Lock Cable: Removal

  1. Disable the SIR System. See AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION. Remove console. See FLOOR CONSOLE  .
  2. Use a small screwdriver to gently pry ignition switch bezel from lower column cover. See Figure . Remove lower column cover fasteners, upper cover, and lower cover. See Figure .
  3. Disengage the retaining tabs and remove the park lock cable assembly from the ignition module. See Figure . Disconnect the end terminal of the park lock cable assembly from the plastic lock-out lever at the control base assembly.
  4. Depress 2 tabs on the end fitting of the park lock cable assembly and remove the park lock cable assembly from the control base assembly. See Figure .
  5. Remove park lock cable assembly from vehicle. See Figure . Note cable routing. See Figure .
scientia non olet · About LEMON Manuals