Engine Controls - Self-Diagnostics: Introduction

Most engine control problems are the result of mechanical breakdowns, poor electrical connections or damaged vacuum hoses. Before considering the computer system as a possible cause of problems, perform basic diagnostic procedures in appropriate BASIC DIAGNOSTIC PROCEDURES article. Failure to do so may result in lost diagnostic time.

If no faults were found while performing basic diagnostic procedures, see DIAGNOSTIC PROCEDURE  under SELF-DIAGNOSTIC SYSTEM. If no Diagnostic Trouble Codes (DTC) are present and driveability problems exist, see appropriate TROUBLE SHOOTING - NO CODES article for diagnosis by symptom (i.e., ROUGH IDLE, NO START, etc.). If only intermittent DTCs are present, see INTERMITTENTS in appropriate TROUBLE SHOOTING - NO CODES article.