LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SW2 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Testing & Engine Component Testing >> Engine Sensors & Switches >> Engine Oil Level Switch >> 5.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Oil Level Switch: 5.7L

  1. Turn ignition on, with engine off. Raise and support vehicle. Disconnect engine oil level switch harness connector. Using DVOM, measure voltage between engine oil level switch input circuit (Brown wire) at engine oil level switch harness connector and chassis ground. If battery voltage is present, go to next step. If battery voltage is not present, go to step  3.
  2. Using DVOM, measure voltage between engine oil level switch harness connector terminals. If battery voltage is present, go to step  5. If battery voltage is not present, go to step  6.
  3. Turn ignition off. Disconnect PCM harness connector C1. Using DVOM, check continuity of engine oil level switch input circuit (Brown wire). If continuity exists, go to next step. If continuity does not exist, go to step  7.
  4. Using a test light connected to battery voltage, probe engine oil level switch input circuit (Brown wire) at engine oil level switch harness connector. If test light illuminates, go to step  8. If test light does not illuminate, go to step  9.
  5. Check for poor connection at engine oil level switch. If problem does not exist, go to step  11. If problem exists, repair as necessary.
  6. Repair open in engine oil level switch ground circuit.
  7. Repair open in engine oil level switch input circuit.
  8. Repair short to ground in engine oil level switch input circuit.
  9. Check for poor connections at PCM. If problem does not exist, go to next step. If problem exists, repair as necessary.
  10. Replace PCM.
  11. Replace engine oil level switch.
scientia non olet · About LEMON Manuals