Memory Recall

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

To recall a position, depress memory button that corresponds with setting for appropriate driver. For memory position No. 1, press memory switch button No. 1. For memory position No. 2, press memory switch button No. 2. For memory position No. 3, press memory switch buttons No. 1 and 2 simultaneously. Seat Control Module (SCM) and Left Door Control Module (LDCM) receives memory request, then supplies battery voltage to seat, steering column (if equipped) and mirror motors until all seat and mirror position sensor feedback voltages equal voltages stored in memory for appropriate driver. LDCM will also send a message over serial data line to other systems responsible for memory recall functions (climate control and radio). Indicator light will flash until programmed position is achieved. Memory recall will not work if the vehicle is moving, the key is out of the ignition switch or if a seat or memory switch is being used.