LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SW2 Automatic >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Engine Control Systems >> Service Information Regarding 2000-2001 S Series Powertrain Control Module Calibrations (00-T-71)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Information Regarding 2000-2001 S Series Powertrain Control Module Calibrations (00-T-71)

Publication date: 2003-01-07
Reference number: 00-T-71

SERVICE INFORMATION REGARDING 2000-2001 S SERIES POWERTRAIN CONTROL MODULE CALIBRATIONS

SERVICE INFORMATION REGARDING 2000-2001 S SERIES POWERTRAIN CONTROL MODULE CALIBRATIONS

TECHNICAL SERVICE BULLETIN

Reference Number(s): 00-T-71, Date of Issue:  01/07/2003
SATURN: 2000 - 2001 S-Series vehicles
SECTION: Electrical

SUBJECT

Service Information Regarding 2000 - 2001 S-Series Powertrain Control Module (PCM) Calibrations.

MODELS AFFECTED

2000 - 2001 Saturn S-Series vehicles.

PURPOSE

The following chart is issued as a calibration reference for PCMs used on 2000 - 2001 Saturn S - Series vehicles.

When vehicle diagnosis leads to recalibration or replacement of a PCM, the current PCM calibration should be verified with Tech 2 (ID information).

The Saturn Service Stall System (SSS) will display valid calibrations for the vehicle being serviced. The calibrations listed in the following chart may vary from those displayed on the SSS if updates are issued prior to this bulletin being updated.

For 1991 - 1999 Saturn S-Series calibration information, refer to Technical Information Bulletin 96-T-46B PCM & ABS EEPROM INFORMATION .

COLUMN HEADING IDENTIFICATION FOR 2000 - 2001 PCMs

SERVICE PLAN

This is the Saturn service P/N of the PCM which calibration ID can be programmed into. A service PCM must be programmed with a valid CALIBRATION ID before it will function properly.

ENGINE & EMISSIONS

Engine and Emissions are used to determine proper calibration number. Refer to Service Parts Identification Label for correct emissions.

DESCRIPTION

Description identifies the purpose of calibration.

TECHNICAL BULLETIN

This is the Saturn Technical Information Bulletin number (if applicable), which details important service, diagnostic, and/or parts information specific to using CALIBRATION ID and/or Service P/N.

CALIBRATION ID

CALIBRATION ID Is displayed electronically using the Scan tool.

IMPORTANT: The most recent CALIBRATION ID will always be shown on top of each list to supersede previous CALIBRATION ID. This number represents the PCM hardware, software and calibration combination and is also referred to as the END MODEL NUMBER.
2000 S-Series PCM Calibration

Service P/N Engine Emissions Description Technical Bulletin Calibration ID
Auto Transaxle 21024986 21025110 DOHC (LL0) Federal (NF7) DTC P0133 Calibration - Updated 00-T-02B 21009140
--- --- --- P0133 Calibration 00-T-02 21009094
--- --- --- Production Calibration --- 21009048
--- --- California (NC1) DTC P0133 Calibration - Updated 00-T-02B 21009141
--- --- --- P0133 Calibration 00-T-02 21009095
--- SOHC (L24) --- Production Calibration --- 21009049
--- --- Federal (NF7) DTC P0133 Calibration - Updated 00-T-02B 21009143
--- --- --- P0133 Calibration 00-T-02 21009097
--- --- --- Production Calibration --- 21009051
--- --- California (NC1) DTC P0133 Calibration - Updated 00-T-02B 21009142
--- --- --- P0133 Calibration 00-T-02 21009096
--- DOHC (LL0) --- Production Calibration --- 21009050
Manual Transxle 21024985 21025109 --- Federal (NF7) DTC P0133 Calibration - Updated 00-T-02B 21009144
--- --- --- P0133 Calibration 00-T-02 21009098
--- --- --- Production Calibration --- 21009052
--- --- California (NC1) DTC P0133 Calibration - Updated 00-T-02B 21009045
--- --- --- P0133 Calibration 00-T-02 21009099
--- --- --- Production Calibration --- 21009053
--- SOHC (L24) Federal (NF7) DTC P0133 Calibration - Updated 00-T-02B 21009147
--- --- --- P0133 Calibration 00-T-02 21009101
--- --- --- Production Calibration --- 21009055
--- --- California (NC1) DTC P0133 Calibration - Updated 00-T-02B 21009146
--- --- --- P0133 Calibration 00-T-02 21009100
--- --- --- Production Calibration --- 21009054