LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SW2 Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System/Traction Control System >> Diagnostic Tests >> DTC C0114: Pump Motor Circuit Open
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C0114: Pump Motor Circuit Open

  1. Turn ignition off. Disconnect EBTCM harness connector. Check resistance between a known-good ground and EBTCM harness connector terminal No. 12 (Black wire). If resistance is less than 2 ohms, go to next step. If resistance is not less than 2 ohms, repair open or high resistance in circuit.
  2. Remove EBTCM. Check EBTCM to BPMV connector for damage, corrosion or poor terminal contact. If no problem is found, go to next step. If a problem is found, replace EBTCM or BPMV as necessary.
  3. Check for presence for brake fluid in connectors. If brake fluid is present, replace EBTCM and BPMV. If no brake fluid is present, go to next step.
  4. Check continuity between BPMV pump motor terminals and pump motor case. If continuity does not exist, replace EBTCM. If continuity exists, replace BPMV and EBTCM.
scientia non olet · About LEMON Manuals