Programming Cancellation
WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Programming sequence will cancel if one of the following conditions occur:
- Program Mode Is Exited Through DIC
- Ignition Is Turned Off
- All 4 TPM Sensors Have Been Programmed
- TPM system Has Been In Program Mode For More Than 2 Minutes & No Sensors Have Been Programmed
If program mode is cancelled with less than 4 TPM sensors stored, remote control door lock receiver will only accept codes programmed up to that point.