LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2001 >> L200 Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> CHRYSLER Corp. >> Engine Control Module Programming (Diesel)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module Programming (Diesel)

NOTE: If battery is disconnected, Engine Control Module (ECM) is disconnected or replaced, or Accelerator Pedal Position Sensor (APPS) has been disconnected or replaced, ECM must be programmed to match the APPS.

Ensure all components are connected. Turn ignition switch to ON position, engine off. Slowly depress accelerator pedal to the floor and release accelerator pedal to idle position one time. This ensures that APPS calibration has been programmed into the ECM. Turn ignition switch to OFF position.

scientia non olet · About LEMON Manuals