Removal & Installation

Open glove box door. Remove glove box light by pulling on plunger. Disconnect glove box light electrical connector. Set glove box light aside. Using flat-blade tool, remove lower right hush panel retainers. Pull lower right hush panel rearward to disengage from front retainers. Set hush panel aside. Remove lower right heater outlet duct. Remove glove box door screws and glove box door. Remove glove box-to-instrument panel screws. Slowly remove glove box, tilting downward to expose BCM, residing on top. Slide BCM out of retaining slots. Disconnect BCM electrical connectors. To install, reverse removal procedure.