LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2001 >> SC1 Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Ford Motor Co. >> Instrument Cluster Programming >> Instrument Cluster Programming Procedure "C"
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Instrument Cluster Programming Procedure "C"

NOTE: After Hybrid Electronic Instrument Cluster (HEC) has been replaced, PCM ID MUST be reset and Passive Anti-Theft System (PATS) parameter reset procedure MUST be performed. See SECURITY ACCESS PROCEDURE .

Perform security access for instrument cluster. See SECURITY ACCESS PROCEDURE . Using NGS tester, select PARAMETER RESET command for instrument cluster. Using NGS tester, select PARAMETER RESET command for PCM. Disconnect negative battery cable and wait 3 minutes for PCM Keep Alive Memory (KAM) to clear. Reconnect negative battery cable. Cycle ignition switch from OFF to ON position using 2 encoded ignition keys. Both PATS keys and PCM ID should be set in instrument cluster.

scientia non olet · About LEMON Manuals