Removal & Installation: Generator: Installation
- Position the generator and install the top bolts finger tight.
- Install the bottom bolts and tighten all generator bolts. Tighten generator to engine bolts to 15 ft. lbs. (20 N.m).
- Connect and tighten battery cable connection at the generator. Tighten to 12 ft. lbs (16 N.m).
- Install accessory drive belt.
- Install throttle body air duct.
- Connect and tighten negative battery cable. Tighten battery terminal bolts to 13 ft. lbs. (17 N.m).
- Reprogram radio stations.
- Lower generator into the engine compartment and connect generator electrical connections. Tighten battery positive cable to generator nut to 12 ft. lbs. (16 N.m).
- Guide generator into engine block with the upper mounting bolt positioned in the generator mounting hole.
- Position generator and install the upper mounting bolts and finger tighten.
- Raise vehicle on hoist.
- Install lower generator mounting bolts.
- Lower vehicle.
- Tighten upper generator mounting bolts to 30 ft. lbs. (40 N.m).
- Install belt tensioner to engine block. Tighten belt tensioner bolts to 30 ft. lbs. (40 N.m).
- Install accessory drive belt.
- Connect negative battery cable. Tighten battery terminal bolts to 13 ft. lbs. (17 N.m).
- Reprogram the radio stations.