LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2002 >> L300 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Removal And Installation >> Servicing Quick Connect Fittings >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Servicing Quick Connect Fittings: Removal

CAUTION: DO NOT ALLOW SMOKING OR THE USE OF OPEN FLAMES IN THE AREA WHERE WORK ON THE FUEL SYSTEM IS TAKING PLACE. ANYTIME THE FUEL SYSTEM IS BEING WORKED ON, DISCONNECT THE NEGATIVE BATTERY CABLE, EXCEPT FOR THOSE TESTS WHERE BATTERY VOLTAGE IS REQUIRED.
CAUTION: WHENEVER FUEL LINE FITTINGS ARE LOOSENED OR DISCONNECTED, WRAP A SHOP CLOTH AROUND FITTING AND HAVE AN APPROVED CONTAINER AVAILABLE TO COLLECT ANY FUEL.
  1. Grasp both ends of one fuel line connection and twist 1/4 turn in each direction to loosen any dirt in quick-connect fitting.
    CAUTION: WEAR SAFETY GLASSES WHEN USING COMPRESSED AIR IN ORDER TO PREVENT EYE INJURY.
  2. Use compressed air in order to blow out dirt from the quick-connect fitting.
  3. Squeeze the plastic release tabs for nylon fittings, use Fuel Line Disconnect Set J37088A for stainless steel fittings or use Fuel Line Separator SA9805E for EVAP purge line fittings.
  4. Pull the connection apart.
scientia non olet · About LEMON Manuals