Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Steering Fluid Reservoir, Capstick, Bracket & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the power steering fluid reservoir bracket (5) into the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts (4) to the power steering fluid reservoir bracket (5).
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
Install the power steering fluid reservoir. Refer to Remote Power Steering Fluid Reservoir Replacement .
Bleed the power steering system. Refer to Bleeding the Power Steering System .