LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2002 >> LW300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The pulley must be installed onto pump shaft so that the pulley hub is flush with the pump shaft.
  1. Using J 25033-C  install the power steering pump pulley onto the power steering pump.
  2. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical-5.7L.
  3. Install the Brake Pressure Modulator Valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve (BPMV) Bracket Replacement in Antilock Brake System.
  4. Install the Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve (BPMV) Replacement in Antilock Brake System.
scientia non olet · About LEMON Manuals