Using Scan Tool

1. Turn the ignition on (transmission in Park/Neutral).
2. Use the DRBIII® and select THEFT ALARM, SKIM, then MISCELLANEOUS.
3. Select PROGRAM IGNITION KEYS.
4. Enter secured access mode by entering the vehicle 4-digit PIN.
5. A maximum of eight keys can be learned to each SKIM AT ONE TIME. Once a key is learned to a SKIM it (the key) cannot be transferred to another vehicle.

If ignition key programming is unsuccessful, the DRBIII® will display one of the following messages:

1. Programming Not Attempted
   
   The DRBIII® attempts to read the programmed key status and there are no keys programmed in the SKIM memory.
2. Programming Key Failed
   
   Possible used key from wrong vehicle. SKIM is unable to program key due to one of the following: Faulty ignition key transponder. Ignition key is programmed to another vehicle.
3. 8 Keys Already Learned, Programming Not Done
   
   SKIM transponder ID memory is full. Obtain ignition keys to be programmed from customer (8 keys maximum). Using the DRBIII®, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS. Program all ignition keys.
4. Learned Key In Ignition
   
   Ignition key transponder ID is currently programmed in SKIM memory.