LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> Ion 1 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Idle Control Systems >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Control Systems: Notes

CAUTION: Do not insert test equipment probes into any connector or fuse block terminal. The diameter of the test probes will deform most terminals. A deformed terminal can cause a poor connection, which can result in system failures. Always use the Connector Test Adapter Kit (J 43907) to frontprobe terminals. Do not use paper clips or other substitutes as they can damage terminals and cause incorrect measurements.
NOTE: Manufacturer does not provide testing procedures for many individual systems and components. For idle control system testing not listed, perform related DTC testing procedure. See DIAGNOSTIC TROUBLE CODE DEFINITIONS in SELF-DIAGNOSTICS - 2.2L ION article.
NOTE: Perform powertrain diagnostic system check prior to testing, and after completing any repairs. See DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - 2.2L ION article.
scientia non olet · About LEMON Manuals