DTC P0106: Manifold Absolute Pressure System Performance: Description

The Engine Control Module (ECM) supplies a 5-volt reference circuit and a low reference circuit to both the Throttle Position (TP) sensor and the Manifold Absolute Pressure (MAP) sensor. The TP sensor sends a voltage signal back to the ECM relative to the throttle plate opening, and the MAP sensor sends a voltage signal back to the ECM relative to the intake manifold pressure. The ECM can detect if the TP sensor or MAP sensor are out of range by comparing the 2 values against the high and low limits and engine speed defined within the engine calibration. If the TP or the MAP are not within the expected limits of the engine calibration, DTC P0106 is set.