LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> L300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control >> Repair Instructions >> Shift Lock Control Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disable the SIR System. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems. . Pull up on the control boot until the indicator bezel disengages from the console.
    Fig 1: Removing & Installing Shift Control Cable From Control Assembly
    GM893834Courtesy of GENERAL MOTORS CORP.
  2. Remove the console. Refer to Console Replacement .
  3. Using a screwdriver, disconnect the control cable from the control assembly.
  4. Disconnect the electrical connector from the indicator bezel.
  5. Remove the control cable retaining clip.
  6. Press the tabs on the control cable and remove the cable from the control assembly.
  7. Disconnect the control cable from the transaxle range switch lever.
    Fig 2: Removing & Installing Shift Control Cable From Transaxle Range Switch Lever
    GM893827Courtesy of GENERAL MOTORS CORP.
  8. Remove the control cable retaining clip.
  9. Press the 2 tabs on the control cable and remove the cable from the control cable bracket.
  10. Remove the control cable grommet from the dash panel.
  11. Remove the control cable from the vehicle.
    Fig 3: Removing & Installing Shift Control Cable From Vehicle
    GM893234Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals