Removal Procedure

Apply the parking brake and place the control assembly in Neutral. The transaxle manual shaft must be in the Neutral position prior to installing the range switch.

Fig 1: Identifying Automatic Transmission Cable & Selector Lever
Courtesy of GENERAL MOTORS CORP.
Remove the shift control cable from the transaxle range switch lever.
Disconnect the electrical connectors from the transaxle range switch.
Remove the transaxle range switch lever nut and lever.

Fig 2: Removing/Installing Transaxle Range Switch Lever & Nut
Courtesy of GENERAL MOTORS CORP.
Remove the transaxle range switch bolts and remove the switch.

Fig 3: Removing/Installing Transaxle Range Switch & Mounting Bolts
Courtesy of GENERAL MOTORS CORP.