Removal & Installation
WARNING: This page is about the Ion 2 4D Coupe, Automatic CVT, which is a different variant/trim than selected.
TRANS ID - AF235 / M43
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Includes: R&I Subframe.
DOES NOT include wheel alignment. | 6.8 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Perform Relearn procedure. | 0.6 | | C |
TRANS ID - VT25E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Includes: R&I Subframe.
DOES NOT include wheel alignment. | 6.8 | 5.3 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.4 | | C |