LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) >> Repair Instructions >> Bypass Valve Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT: When installing the bypass valve actuator to the supercharger, rotate the assembly until the bypass valve shaft lever comes in contact with the stop block.
  1. Rotate the bypass valve actuator until the rod engages the lever.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bypass valve actuator bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  4. Remove the bypass valve positioner from the bypass valve actuator. Discard.
  5. Install the vacuum hose to the bypass valve actuator.