Installation Procedure

Insert the retaining tab of the EVAP canister into the slotted bracket on the vehicle underbody.

Fig 1: View Of EVAP Canister Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the EVAP canister retaining bolt (1).
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 2: Locating EVAP Canister Retaining Bolt

Courtesy of GENERAL MOTORS CORP.

Connect the hose connections (1,2,3) to the EVAP canister. Refer to Quick Connect Fitting(s) Service (Plastic Collar) (Press Release) .

Fig 3: View Of EVAP Pipes

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of EVAP Canister Vent Solenoid Valve Electrical Connector

Courtesy of GENERAL MOTORS CORP.