Heated Oxygen Sensor Replacement - Position 1: Notes
NOTE:
The oxygen sensor uses a permanently attached pigtail and connector. Do not remove the pigtail from the oxygen sensor. Damage to or removal of the pigtail connector could affect proper operation of the oxygen sensor.
NOTE:
The use of excessive force may damage the threads in the exhaust manifold/pipe.
IMPORTANT:
The in-line connector and louvered end must be kept clear of grease, dirt or other contaminants. Avoid using cleaning solvents of any type. DO NOT drop or roughly handle the oxygen sensor.
IMPORTANT:
The oxygen sensor may be difficult to remove when the engine temperature is less than 48°C (120°F).