Body Control Module Replacement
WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Preliminary Procedures: Remove the right console extension panel. Refer to Extension Replacement - Floor Console - Side
. |
|
| 1 | Screw, Body Control Module Assembly Tighten: 2 N.m (18 lb in) |
| 2 | Module Assembly, Body Control Tip: Reprogram the body control module (BCM) after replacement. Refer to Body Control Module (BCM) Programming/RPO Configuration . |