Removal & Installation
WARNING: This page is about the Ion 1 Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Includes: Bleed Clutch System. Includes: R&I Subframe. DOES NOT include wheel alignment. | 6.5 | 5.0 | C | |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| 0.4 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH SLAVE CYLINDER: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.8 | B | ||
| Combination Procedure: DIFFERENTIAL ASSEMBLY: Overhaul: | ||||
| 4.4 | A | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.4 | C | |||