Installation Procedure

Insert the retaining tab of the EVAP canister into the slotted bracket on the vehicle underbody.

Fig 1: View Of EVAP Canister Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the EVAP canister retaining bolt (1).
Tighten: Tighten the bolt to 10 N.m (89 lb in).

Fig 2: Locating EVAP Canister Retaining Bolt

Courtesy of GENERAL MOTORS CORP.

Connect the hose connections (1, 2, 3) to the EVAP canister. Refer to Quick Connect Fitting(s) Service (Plastic Collar) (Press Release) .

Fig 3: View Of EVAP Pipes

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of EVAP Canister Vent Solenoid Valve Electrical Connector

Courtesy of GENERAL MOTORS CORP.