LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement (SCIP) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT: Use the new SCIP sensor seal provided with the new SCIP sensor.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the SCIP sensor (1) into the intake manifold.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    2. Fig 1: Locating SCIP Sensor & BARO Sensor
    GM1389393Courtesy of GENERAL MOTORS CORP.
  2. Connect the SCIP sensor harness connector.
scientia non olet · About LEMON Manuals