Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
- Use a 3-volt CR2016 battery or the equivalent. Install the battery (2) with the positive side up.
- Close the transmitter case (6, 4).
- Ensure that the seal is in position. Align the 2 halves of the case (6, 4) and snap the halves together.
- Verify the operation of the transmitter.