LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Removing/Installing Fuel Tank Pressure Sensor
    GM892357Courtesy of GENERAL MOTORS CORP.
  1. The fuel tank pressure (FTP) sensor is located on top of the fuel pump module cover.
  2. Remove the fuel tank from the vehicle. Refer to Fuel Tank Replacement .
  3. Disengage the electrical connector from the FTP sensor.
  4. Remove the retaining nut and washer.
  5. Disengage the sensor from the fuel pump module cover.