LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the insulator panel. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
  2. Remove the electrical connector position assurance (CPA) clip.
  3. Fig 1: Disconnecting/Reconnecting Accelerator Pedal Position Sensor Electrical Connector
    GM1544734Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the accelerator pedal position sensor electrical connector.
  5. Remove the accelerator mounting bolts (1) from the accelerator bracket.
  6. Remove the accelerator assembly (2) from the vehicle.