Erasing Channels
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
To erase programmed channels, hold down the 2 outside buttons until the light on the GDO transmitter begins to flash. Individual channels cannot be erased, but can be reprogrammed using the Garage Door Opener Programming and the Training GDO for Rolling Code Receivers procedures.
Non-Compatible Garage Door Openers
| Manufacturer | Model Number |
|---|---|
| Chamberlain | G-3467 |
| Click Card | ATDG-90 |
| Genie | AR-55 |
| Genie | AR-30 |
| Linear | Code Red |
| Linear | Moore-o-matic |
| Linear | DX Format |
| Micom | Safeway |
| Pulsar/Allister | 20 |
| Skylink | Skylink |
| Stanley | 1048 |
| Stanley | 1054 |
| Stanley | 1064 |
| Telectron | T-22A |
| Telectron | T-80 |
| Telectron | T-80G |
| Telectron | TP-21 |