Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Position the garage door opener (2) to the overhead console.
- Install the screws to secure the garage door opener (2) to the overhead console.
Tighten: Tighten the nuts to 2 N.m (18 lb in).
- Connect the electrical connectors.
- Align the overhead console within the vehicle.
- Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
- Install the overhead console mounting screw.
Tighten: Tighten to 2 N.m (18 lb in).
- Install the courtesy lamp lens.
- Refer to Control Module References for programming and setup information.
NOTE:
Refer to Fastener Notice
.