Scan Tool Data Definitions
WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Accessory Relay Command
-
The scan tool displays the state of the accessory relay command.
- Battery Voltage Signal
-
The scan tool displays the vehicle voltage.
- Ignition Mode Switch
-
The scan tool displays the ignition switch voltage signal. This signal is derived from the ignition Off/Run/Crank circuit.
- Ignition Switch Accessory
-
The scan tool displays the state of the ignition switch accessory circuit.
- Ignition Switch Run/Crank
-
The scan tool displays the state of the ignition switch Run/Crank circuit.
- Key In Ignition Cylinder
-
The scan tool displays whether or not the key is in the ignition cylinder.
- Power Mode
-
The scan tool displays the vehicle power mode.
- Run Relay Command
-
The scan tool displays the state of the Run relay.
- Run Crank Relay Command
-
The scan tool displays the state of the Run Crank relay.