LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2005 >> Relay FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Shift Lock Actuator Electrical Connector
    GM1538451Courtesy of GENERAL MOTORS CORP.
  1. Install the shift lock actuator (2) to the linear shift assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the shift lock actuator screws (3).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Connect the shift lock actuator electrical connector (1).
    4. Fig 2: Identifying Linear Shift Assembly Bolt/Holes
    GM1538450Courtesy of GENERAL MOTORS CORP.
  4. Rotate the linear shift assembly (2) up to align the linear shift assembly bolt holes.
    5. Fig 3: View Of Shift Lock Actuator Linear Shift Front Bolts
    GM1538449Courtesy of GENERAL MOTORS CORP.
  5. Install the linear shift front bolts (2).

    Tighten:  Tighten the bolts (1, 2) to 10 N.m (89 lb in).

  6. Install the steering column. Refer to Steering Column Replacement in Steering Wheel and Column.
  7. Install the trim covers to the steering column. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
scientia non olet · About LEMON Manuals