Rear Toe Adjustment

Fig 1: Locating Toe Link-To-Frame Fastener

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The frame of the vehicle is slotted, a cam nut is available for service if required.

Rotate the toe link cam nut in the direction necessary to correct the toe angle.
Snug the toe link-to-frame fastener, do not tighten at this time.
Reinspect the rear toe specifications and adjust as necessary.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Hold the nut and tighten the link-to-frame fastener bolt.
Tighten: Tighten the bolt to 110 N.m (81 lb. ft.).
Repeat the procedure for the other rear wheel.