Removal & Installation
WARNING: This page is about the Vue Base, 2.2 D, AWD, which is a different variant/trim than selected.
TRANS ID - 4T45E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 7.2 | | C |
| Combination Procedure: CONVERTER: Drain & Refill: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 1.0 | | C |
TRANS ID - VT25E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| In-Line4,AWD,Trans Mfr CD VT25-E/M75 | DOES NOT include wheel alignment. | 8.7 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.5 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.4 | | C |