LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction (2 Of 2) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
GM1389396Courtesy of GENERAL MOTORS CORP.
  1. Press the IAT sensor (3) into the engine.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the IAT sensor bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Connect the IAT sensor harness connector.
scientia non olet · About LEMON Manuals