Delphi Connectors (Pull To Seat)

Delphi Connectors (Pull to Seat Connectors)

Terminal Removal Procedure

If the terminal is visibly damaged or is suspected of having a faulty connection, the terminal should be replaced.

Follow the steps below in order to repair pull-to-seat connectors.




1. Remove the connector position assurance (CPA) device and/or the secondary lock.
2. Disconnect the connector from the component or separate the connectors for in-line connectors.
3. Remove the terminal position assurance (TPA) device.
4. Insert the proper pick or removal tool into the front of the connector body.

Terminal Repair Procedure

Use the appropriate wire assembly repair kits available through Saturn Service Parts.