Scan Tool Data Definitions
- Battery 1
-
The scan tool displays the current state of the battery in volts.
- Decoded Switch State
-
The scan tool displays the current state of the decoded switch state as Undecided, Lock, Unlock, or Off.
- Door Lock Switch
-
The scan tool displays the current state of the door lock switch in volts.
- Driver Door Switch
-
The scan tool displays the current state of the drivers door ajar switch as either open or closed.
- Drivers Door Unlock Fdbk.
-
The scan tool displays the current state of the drivers door unlock Fdbk. as On/Off.
- Fob ID
-
The scan tool displays the key fob by number 1 through 4 or none, that was last used to enter the vehicle.
- Lock All Doors Fdbk.
-
The scan tool displays the current state of the lock all doors Fdbk. as On/Off.
- Passenger Door Switch
-
The scan tool displays the current state of the passengers door ajar switch as either open or closed.
- RKE Lock Button
-
The scan tool displays the current state of the lock button on the key fob that is being operated as On/Off.
- RKE Low Battery
-
The scan tool displays the current RKE low battery status as Yes/No. If the fob battery voltage falls below 2.5 volts the RKE low battery display will read YES.
- RKE Panic Button
-
The scan tool displays the current state of the panic button on the key fob that is being operated as On/Off.
- RKE Sinc
-
The scan tool displays the current state of synchronization between the key fob and the integrated body control module (IBCM) as Yes/No.
- RKE Trunk Button
-
The scan tool displays the current state of the trunk button on the key fob that is being operated as On/Off.
- RKE Unlock Button
-
The scan tool displays the current state of the unlock button on the key fob that is being operated as On/Off.
- Trunk Release
-
The scan tool displays the current state of the trunk release switch as On/Off.
- Unlock All Doors Fdbk.
-
The scan tool displays the current state of the unlock all doors Fdbk. as On/Off.