Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion 3 and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Shift Solenoid Assembly

Courtesy of GENERAL MOTORS CORP.

Install the shift solenoid assembly from the shift control assembly.
Connect the shift solenoid assembly wiring retainers to the shift control assembly.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the shift solenoid retaining screw.
Tighten: Tighten the screw to 3 N.m (27 lb in).
Install the shift indicator bulb from the shift control assembly.
Install the shift control assembly. Refer to Automatic Transmission Control Replacement in Automatic Transaxle - 4T40-E/4T45-E.