Ignition Data

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Accessory: The scan tool displays On when the accessory relay is active.
Battery 1: The scan tool displays the value of the vehicle battery voltage.
Ignition Accessory: The scan tool displays Active when the ignition switch is in the Accessory or Run position.
Ignition Mode Switch: The scan tool displays the value of the Passlock data voltage, which is the signal at the Off/Run/Crank circuit of the Ignition switch output and the BCM input.
Ignition Run/Crank: The scan tool displays High when the vehicle ignition switch is in the Run or Crank position.
Key in Ignition: The scan tool displays Yes when the key is in the ignition.
Power Mode: The scan tool displays Run when the ignition switch is in the Run position. Accy will be displayed in the Accessory position. Accy will also be displayed when the vehicle is in the RAP power mode. Off will be displayed when the ignition switch is in the Off position after the RAP function has timed out or has been overridden by a door switch.
Run/Crank Relay Command: The scan tool displays On when the Run/Crank relay is active.