Installation Procedure

Fig 1: Identifying Overhead Console Components

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the screws to secure the garage door opener (2) to the overhead console.
Tighten: Tighten the nuts to 2 N.m (18 lb in).

Fig 2: View Of Overhead Console Mounting

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors.
Align the overhead console within the vehicle.
Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
Install the overhead console mounting screw.
Tighten: Tighten to 2 N.m (18 lb in).
Install the courtesy lamp lens.
Refer to Control Module References for programming and setup information.